User manual

STEP 1: Obtain an updated software image file from your ISP.

STEP 2: Enter the path and filename of the firmware image file in the Software

File Name field or click the Browse button to locate the image file.

STEP 3: Click the Update Software button once to upload and install the file.

NOTE: The update process will take about 2 minutes to complete. The device

will reboot and the browser window will refresh to the default screen upon

successful installation. It is recommended that you compare the

Software Version at the top of the Device Information screen with the

firmware version installed, to confirm the installation was successful.

8.8 Save and Reboot

To save the current configuration and reboot the router, click Save/Reboot.

NOTE: You may need to close the browser window and wait for 2 minutes before

reopening it. It may also be necessary, to reset your PC IP configuration.