User manual

94
7.4 Wireless Bridge
This page allows you to configure wireless bridge features of the wireless LAN
interface. You can select Wireless Bridge (also known as Wireless Distribution
System) to disable access point functionality. Selecting Access Point enables access
point functionality. Wireless bridge functionality will still be available and wireless
stations will be able to associate to the AP. Select Disabled in Bridge Restrict, which
disables wireless bridge restriction. Any wireless bridge will be granted access.
Selecting Enabled or Enabled (Scan) enables wireless bridge restriction. Only those
bridges selected in Remote Bridges will be granted access.
Feature Options
AP Mode Access Point
Wireless Bridge
Bridge Restrict Enabled
Enabled (Scan)
Disabled
7.5 Advanced
The Advanced page allows you to configure advanced features of the wireless LAN
interface. You can select a particular channel on which to operate, force the
transmission rate to a particular speed, set the fragmentation threshold, set the RTS
threshold, set the wakeup interval for clients in power-save mode, set the beacon
interval for the access point, set XPress mode and set whether short or long
preambles are used.