User`s manual

20
For the rules we can set two priorities: LOW (minimum of throughput) and HIGH (maximum of
throughput).
For LOW criteria:
 The LOW rule is not applied when: the traffic doesn’t fulfill the criteria.
 The LOW rule is applied when: the traffic fulfilled the criteria. In this case is the traffic almost
suspended.
For HIGH criteria:
 The HIGH rule is not applied when: the traffic doesn’t fulfill the criteria.
 The HIGH rule is applied when: the traffic fulfilled the criteria. In this case, the traffic can to
occupy the whole of bandwidth. In case of the VoIP traffic the used bandwidth correspond to
the used codec. In case of the FTP traffic can be occupied the whole of bandwidth. In this
case is the traffic almost suspended.