User's Manual

Table Of Contents

5.2 NAT

To display this option, NAT must be enabled in at least one PVC. NAT is not an available option in

Bridge mode.

5.2.1 Virtual Servers

Virtual Servers allow you to direct incoming traffic from the WAN side (identified by Protocol and

External port) to the internal server with private IP addresses on the LAN side. The Internal port

is required only if the external port needs to be converted to a different port number used by the

server on the LAN side.

A maximum of 32 entries can be configured.

To add a Virtual Server, click Add. The following will be displayed.

Consult the table below for field and header descriptions.