User's Manual

60
5.4.2 Security
The following screen appears when Wireless Security is selected. The options shown here allow
you to configure security features of the wireless LAN interface.
Click Apply/Save to implement new configuration settings.
WIRELESS SECURITY
Setup requires that the user configure these settings using the Web User Interface (see the table
below).
Select SSID
Select the wireless network name from the drop-down box. SSID stands for Service Set
Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID
does not match, that client will not be granted access.
Network Authentication
This option specifies whether a network key is used for authentication to the wireless network.
If network authentication is set to Open, then no authentication is provided. Despite this, the
identity of the client is still verified.