User Manual

Step 1.

Step 2.

Note: • If you are connecting to the WAP-5836 directly from a PC, be

sure to set a static IP in the same range as the AP or Client unit

(e.g. 10.0.0.25) to access the Web Configuration page.

• If the WAP-5836 is connected to a Gateway or Router that has a

DHCP server, it will automatically get an IP address from that

device. Be sure to check your Gateway or Router to see what IP

address was given to the WAP-5836 units and use that to log in

to the Web Configuration page.

Log into the WAP-5836 web GUI through a browser such as IE

with either the IP address the device was given by your DHCP

server, or the default IP address of 10.0.0.10 for devices that

have yet to be paired.

Type default Username: root and Password: 12345

Advanced Troubleshooting

• The WPS function is not working

Make sure that:

• The devices are in either AP or Client mode.

• The WPS function is activated on the AP device.

a. Enter into the WAP-5836 Web GUI

b. Type default Username: root and Password: 12345