User Manual

144
Appendix C – Specifications
Hardware Interface
RJ-14 X1 for Multi DSL Bonded, RJ-45 X 3 for LAN (10/100 Base-T), RJ-45 X
1 for GB Port, (10/100/1000 BaseT auto-sense), Reset Button X 1, WPS/WiFi
on/off button x1, Power Switch X 1, Wi-Fi Antennas X 2, USB Host
Dual WAN Interface
VDSL2 .........Comply with G.993.2 (supporting profile 8a, 8b, 8c, 8d, 12a,
12b, 17a)
VDSL2 bonded: up to 17a profile G.998.2 (VDSL2 Bonded)
ADSL2+ …….. Comply with ITU-T G.992.5, ITU-T G.992.3, Annex A/L/M
G.998.1 (ADSL2+ Bonded):
Gigabit Ethernet WAN
10/100/1000 Mbps
RJ45 connector
LAN Interface
Standard ......................IEEE 802.3, IEEE 802.3u
MDI/MDX support ..........Yes
Multiple Subnets on LAN
Wireless Interface
Standard ....................IEEE802.11b/g/n
Encryption ....................64/128-bit Wired Equivalent Privacy (WEP)
Channels ......................11 (US, Canada)/ 13 (Europe)/ 14 (Japan)
Data Rate .....................Up to 300Mbps
Multiple BSSID ..............Yes
WDS ............................Yes
WEP ............................Yes
WPA ............................Yes
WPA2 ..........................Yes
IEEE 802.1x .................Yes
10,25,50,100mW@22MHz channel bandwidth output power level can be
selected according to the environment
ATM Attributes
RFC 2684 (RFC 1483) Bridge/Route; RFC 2516 (PPPoE);
RFC 2364 (PPPoA); RFC 1577 (IPoA)
PVCs ..........................16
AAL type ......................AAL5
ATM service class ..........UBR/CBR/VBR-rt//VBR-nrt
ATM UNI support ...........UNI 3.1/4.0
OAM F4/F5 ...................Yes
PTM Attributes
ATM Adaptation Layer: Ethernet packet format,
Support 8 flows,
Support preemption and dual latency,
Support PTM shaping