User's Manual

13
* Note: PG-9172AC does not support secured LED indication. If the PLC LED is RED in
deployment, it may indicate that the G.hn network is in unsecured mode. The user needs to
manually pair the PLC units to create a secure connection.
Chapter 4 Button Functions
BUTTON
WORDING ON
ENCLOSURE
BUTTON
FUNCTION
SECONDS
TO PUSH
BUTTON
DESCRIPTION
1 PLC Sync PLC pairing +2sec
Press more than 2
seconds (
LED
starts slow blinking),
and configuration
period is open
2 WPS
WPS 2-5 sec
1. Press for 2-5
seconds, and both
& LED
blink slowly.
2. Then release the
button, the AP WPS
is in process.
WiFi
SSID/PW copy
+5 sec
Press for +5 seconds,
& , ,
and
LED blink
slowly, the WLAN is in
sync with main
gateway for SSID
and Key on 2.4GHz
3 RESET Factory reset +10 sec
Press more than 10
seconds: a factory
reset of the system
(both G.hn & WiFi) is
performed
4 WiFi ON/OFF
Switch off/on
2.4GHz/5GHz
WiFi interfaces
+2 sec
Disable/enable both
2.4G/5GHz WLAN
interfaces by pushing
the button for +2s
1&2 N/A
Switch off/on all
LED’s
+2 sec
Turn on/off all LED’s by
pushing both PLC Sync
and WPS buttons
simultaneously for +2s