User's Manual

6.3 2.4G WPS Settings

This page allows you to configure the WPS Settings for 2.4Ghz interface of the access point.

Wi-Fi Protected Setup allows that each time you want to set up a connection, there is no

need to select the encryption mode and enter the encryption password.

Heading Description

WPS Select to Enable/Disable WPS from the drop-down menu.

Then click the Apply button to implement your selection.

Configure Enrollee Select between via PBC (Push Button Control) and via PIN

(Personal Identification Number)

WPS Status Shows the current WPS status

Click the Activating WPS button to confirm your choice.