User's Manual

46
Chapter 6 Tools
6.1 Tools Log
This page has the ability to directly view the PHY statistics of the device.
Pressing the “Start” button will start a 10 second polling log. This data can be useful
to assist in debugging the system.
After selecting “Start”, the page will look similar to the image above. The logging will
stop after pressing the “Stop” button. If the IP address is changed or if the device is
shut off, this page will give an error message if logging was in progress. To recover
the session, please press the “Start” button again.
This interface takes data from an internal OS file, so intermittently; there may be
management messages that show up in this log.