User's Manual
Table Of Contents
- The cardboard box, the plastic contained in the packaging, and the parts that make up this router can be recycled in accordance with regionally established regulations. Never dispose of this electronic equipment along with your household waste; you m...
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Web User Interface
- Chapter 4 Status
- Chapter 5 Config
- Chapter 6 Tools
- Chapter 7 System
- Appendix A - Specifications
- Appendix B - AP / Station
7
2.2 LED Indicators
The front panel LED indicators are shown below and explained in the following table.
This information can be used to check the status of the device and its connections.
LED Color Mode Description
POWER GREEN
On Power on
Off Power off
ETH1 GREEN
On
Ethernet connected
Off
Ethernet not connected
Blink
Ethernet is transmitting/receiving
ETH2 GREEN
On
Ethernet connected
Off
Ethernet not connected
Blink
Ethernet is transmitting/receiving
WiFi GREEN
On
Wi-Fi enabled
Off
Wi-Fi disabled
Blink
When no client connected
WPS GREEN
On WPS connection successful
Off
No WPS (5G) association process ongoing
Blink
WPS (5G) connection in progress
AP GREEN
On
WAP-5940 working in AP mode
Off
WAP-5940 working in Station mode
Station GREEN
On
WAP-5940 working in Station mode
Off
WAP-5940 working in AP mode