User Manual

DeviceMaster Driver User Guide: 2000595 Rev. A Updating the Driver - 21
NS-Link Device Driver Installation
Updating the Driver
Use the following procedure to update the DeviceMaster NS-Link device driver
after initial installation.
If you are unsure what driver version is running, see Checking the Device Driver
Version on Page 20.
1. Locate the latest NS-Link device driver assembly (Page 7) and copy it to a
location that is available to the host.
2. Close any applications that are using serial ports before the NS-Link device
driver installation.
3. Start the update by executing the .exe file.
4. Click Next to start the Installation Setup Wizard.
5. Optionally, enter a different location to install the latest NS-Link device driver
files.