User Manual

54 - Loading a Driver Configuration File DeviceMaster Driver User Guide: 2000595 Rev. A
Using Driver Configuration Files
2. Optionally, change the default file name and click Save.
Loading a Driver Configuration File
You must have previously saved a configuration file before you can load a
configuration file.
The driver configuration file uploads in portions:
• If you highlight a device and click Load Configuration and Apply for the device-
level configuration parameters to reload on the device.
• To load port-level
configuration parameters, you must highlight a single port
and click Load Configuration and Apply. You must upload each port's
configuration parameters separately.
Loading Device
Configuration
Use the following procedure to load the configuration file for device-level
information for your device.
1. If necessary, open the Comtrol Drivers Management Console using one of these
methods:
• Windows Control Panel; go to your Control Panel and click on the
Comtrol Drivers Management Console.
• Shortcut; located under Start > Program Files > Comtrol > Product_Name >
Comtrol Drivers Management Console.
2. Depending on your operating system, you may need to click Ye s to the Do you
want to allow the following program to make changes to this computer? User
Account Control message.