User Manual
70 - Troubleshooting and Technical Support DeviceMaster Driver User Guide: 2000595 Rev. A
Using the Advanced Tab
Using the Advanced Tab
You can use the Advanced tab to get a summary of the DeviceMaster status. The
Advanced tab can be useful for troubleshooting network problems with your
DeviceMaster.
Note: To use the Advanced tab, you must associate a MAC address to the
DeviceMaster before programming an IP address (Page 34).
Use the following procedure to access the Advanced tab.
1. If necessary, access the Comtrol Drivers Management Console.
2. Highlight the DeviceMaster.
3. Click the Advanced tab.
Note: You must have previously associated a MAC address to the
DeviceMaster (Associating the MAC Address
on Page 34).
Refer to the Device Status table (Page 73) for a list of messages and
explanations.
4. You can click the History button to review the last ten actions on the
DeviceMaster.