Instruction Manual

116 - Event Selection RocketLinx ES8509-XT User Guide: 2000557 Rev. C
Configuration Using the Web Interface
Event Selection
Event Types can be divided into two basic groups: System Events and Port Events. System Events are related
to the overall function of the switch, whereas Port Events are related to the activity of specific ports.
System Event Warning is sent when….
Device Cold Start Power is cut off and then reconnected.
Device Warm Start Reboot the device by CLI or web user interface.
Authentication failure An incorrect password or SNMP Community String is entered.
Time Synchronize
Failure
Accessing the NTP Server is failing.
Power 1 Failure PW1 power failure.
Power 2 Failure PW2 power failure.
Fault Relay The DO/Fault Relay is on.
DI1 Change The Digital Input#1 status has changed.
Ring Event A ring event has occurred.
Loop Protection A loop protection event has occurred.
SFP
The information read from the DDM SFP transceiver is over temperature or
out the range of TX/RX power.