User Guide Owner manual

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G VLAN Table - 89
Configuration Using the Web Interface
VLAN Table
This table displays the current settings of your VLAN table, including VLAN ID, Name, Status, and Egress
rule of the ports.
After creating the VLAN, the status of this VLAN remains in Unused status until you add ports to the VLAN.
VLAN Table Page
VLAN ID The ID of the VLAN.
Name The name of the VLAN.
Status
Static means that this is a manually configured static VLAN.
Unused means this VLAN is created by web user interface/CLI and has no
member ports and the VLAN is not workable yet.
Dynamic means this VLAN was learnt by GVRP.
• -- No VLAN setting.
• T A Trunk Link is a LAN segment used for multiplexing VLANs
between VLAN bridges. All the devices that connect to a Trunk Link
must be IEEE 802.1Q VLAN-aware, which sends and receives frames
with IEEE 802.1Q tags.
• U An Access Link is a LAN segment used to multiplex one or more IEEE
802.1Q VLAN-unaware devices into a Port of a VLAN Bridge. Devices
that are connected to an Access Link sends and receives frames without
IEEE 802.1Q tagging, which is the identification of the VLAN it belongs
to.