User guide

18 - Configuring the DeviceMaster FreeWire DeviceMaster FreeWire Installation and User Guide: 2000412 Rev. D
Using the DeviceMaster FreeWire Installation Wizard
4. Configure the network settings for your environment.
a. After entering the network settings, you can click Run Test to verify that
DeviceMaster FreeWire has been programmed with valid network settings
or optionally, click Next and go to Step 5.
b. Click Continue.
c. If you programmed the DeviceMaster FreeWire for your network
addressing scheme, you can change the IP address on your host machine
back to the appropriate network settings while this message is displaying.
d. If the DeviceMaster FreeWire network settings are valid, a green check
mark appears next to the Run Test button.
e. Click Next to continue the configuration process.