User guide

24 - Configuring the DeviceMaster FreeWire DeviceMaster FreeWire Installation and User Guide: 2000412 Rev. D

Configuring Network and Wireless Settings

After initial DeviceMaster FreeWire configuration using the Installation Wizard,

you can use the Installation Wizard to change network or wireless settings.

Optionally, you can use the FreeWire Manager to change your network or wireless

settings. In addition, you can use the FreeWire Manager if you need to perform

advanced configuration such as:

• Serial port

- Protocol (raw data or Telnet)

- Settings, for example: baud rate, data bits, parity bit, stop bits, and flow

control

• Wireless (Ad hoc or infrastructure)

•Network

Advanced Serial

Port Configuration

Use the following procedure if you need to configure advanced serial port settings

for the DeviceMaster FreeWire.

1. Start the FreeWire Manager (desktop shortcut or Start/Programs/Comtrol/

FreeWire/FreeWire Manager).

2. Highlight the DeviceMaster FreeWire that you want to configure and click the

Serial Port tab.

3. Set the options that reflect your serial device’s properties.

4. Click Apply to Device.

5. If you have completed all settings changes, click Exit.