User guide

DeviceMaster FreeWire Installation and User Guide: 2000412 Rev. D Configuring the DeviceMaster FreeWire - 25
Configuring Ad Hoc Mode
Configuring Ad Hoc
Mode
Use the following procedure if you need to configure the DeviceMaster FreeWire
for Ad hoc mode.
1. Start the FreeWire Manager (desktop shortcut or Start/Programs/Comtrol/
FreeWire/FreeWire Manager).
2. Highlight the DeviceMaster FreeWire that you want to configure and click the
Wireless tab.
3. Click Ad hoc.
4. Click the appropriate Security settings for your environment.
5. Click Apply To Device.
6. If you have completed all settings changes, click Exit.
7. If you do not have any other DeviceMaster FreeWire units to configure, close
the FreeWire Manager.
Refer to Connecting the Serial Device
on Page 41 for serial port pin-out
information.