User guide

28 - Web Browser and Console Configuration DeviceMaster FreeWire Installation and User Guide: 2000412 Rev. D
Using the Web Browser Interface
To operate on an 802.11b/g network, you must set up the same configuration
as the wireless network you want the DeviceMaster FreeWire to communicate
on. All nodes of a wireless network need to have the same settings in order to
communicate with each other.
• Wireless mode (ad-hoc or infrastructure)
•SSID channel
•Data rate
• Security settings (WEP keys, 802.1x settings, etc.)
3. Enter the DeviceMaster FreeWire IP address in your web browser. The Server
Info screen displays.
4. Click the Login menu selection (left), enter the password (default is access),
and then click Submit.
5. You should check the firmware version (Page 35
) and if necessary, update the
firmware before configuring the DeviceMaster FreeWire using the web page.
Note: Use the Help system if you need information about any of the settings.