Manual

34 - Chapter 5. IO-Link Port Configuration IO-Link Master 4-EIP User Guide: 2000582 Rev. A
Editing EtherNet/IP Settings
5.2.1. Editing EtherNet/IP Settings
You can use this procedure to configure EtherNet/IP characteristics for each port.
1. If necessary, open the IO-Link Master web interface with your web browser using the IP address.
2. Click Configuration in the menu bar.
3. Click the ETHERNET/IP SETTINGS submenu.
4. Click the EDIT button for the port that you want to configure.
5. Make appropriate selections for the IO-Link device that you will connect to that port.
You can use the help system if you require definitions or values for the options or 5.2.2. EtherNet/IP
Settings Parameters on Page 35.
6. Scroll to the top of the page and click the SAVE button.
Make sure that the port now displays the EDIT button.
If it displays the SAVE and CANCEL buttons, that means that one of the parameters contains an incorrect
value. If necessary, scroll down the page, make the needed corrections, and click SAVE.
7. Repeat for each port that requires configuration changes.