User guide

34 - Managing the DeviceMaster UP
DeviceMaster UP 16-Port
Hardware User Guide: 2000596 Rev. B
Managing the DeviceMaster UP
Loading a
Configuration File
Use the following procedure to load a previously saved a DeviceMaster UP
configuration file. Load a configuration file and apply it to a selected DeviceMaster
UP or DeviceMaster UPs from the Main screen or the Software Settings tab on the
Properties screen.
Use this procedure to load a configuration file using the Device List pane to
one or
more DeviceMaster UP units.
1. Highlight the device or devices in the Device Li
st pane that you want to load
and use one of the following methods:
•Click the Load button
• Right-click and then click
Conf
iguration > Load
2. Click Ye s
to the warning that it
wi
ll take 25 seconds per devi
ce
and
it may also reboot the devices.
3. Browse to the lo
cation of the
conf
iguration file, click the fi
le
na
me (.dc) and then Open.
4. Click the All check bo
x or click
only
the properties that you wa
nt
to
load for each property page
in
t
he configuration file and th
en
cl
ick Done.
Note: If you click All, ever
y
selecte
d DeviceMaster UPs
will be programmed with
the same IP address.
5. Close the Load Conf
iguration
popup message.