Operation Manual

Allgemeine Hinweise / Problemlösungen
| 40
General remarks / Troubleshooting
41 |
Battery:
1 lithium button cell 2032, 3V
Battery change is displayed on screen.
Changing batteries:
• Observe direction of plus and minus poles; when the
compartment is open you must see the PLUS side of
the battery!
• If sealing ring is loose, re-insert it.
• After battery changing, all data have to be re-entered again.
We are liable for damages in accordance with the statutory
regulations in respect to our contractual partners.
 KMH no display
• Old handlebar holder with radio transfer (RDS) used?
• Casing pushed over magnet (cf. Fig. 9)?
• Computer correctly slotted into holder?
• Cable checked for breaks?
• Contacts checked for oxidation/corrosion?
• Distance between magnet and sensor (max. 5 mm)
• Checked whether magnet is magnetised?
 No display (screen blank)
• Check battery
• Battery inserted correctly (plus and minus)
• Battery contact ok? (bend carefully!)
 KMH wrong display
• 2 magnets installed?
• Magnet positioned correctly?
• Wheel size set wrongly?
• Correct handlebar installed after bike changed?
 Display black/changes slowly
• Temperature too high (>60°C) or too low (<0°C)
Batterien können nach Gebrauch
zurückgegeben werden.
Batteries can be returned after use.
Les piles peuvent être redonnées après usage.
Batterijen kunnen na gebruik teruggegeven worden.