User guide

4
Operation
Function
Control Function Descriptions
(continued)
Operation l 4-29
Screen
SCREEN 74
SCREEN 75
SCREEN 76 (Current Monitor
Option)
SCREEN 77
DRYER SETUP OTHER
OPT INSP COM PW
CFM MONITOR
NOT INSTALLED EDIT
PROCESS CURRENT TAP
5 A
PROCESS CURRENT SCALE
1
This is the Dryer Setup Other screen. It
can be found by pressing the Select
Category button under the word Other on
the Dryer Setup Screen (36). By pressing
the Select Category buttons under the
titles, the user can select to see setup infor-
mation for Options, Inspection,
Communications or Password.
This is an example of an Option
Installation screen. With the proper pass-
word (see page 4-32, screen 85) and hard-
ware installed, an option can be turned on
by pressing the Select Category screen
under the word Edit. This will change an
option from Not Installed to Installed. The
“ENTER” key must be pressed to lock in
the change. Once an option is installed,
there may be additional screens that show
in the menu structure that need to be setup.
This screen is used with the current moni-
tor option and tells the control which tap is
used on the current sensing board (5A,
10A, or 15A).
This screen is used with the current moni-
tor option and is used to scale the reading
to the proper read-out.
NOTE: Screens labeled 75 in
the display screen flow chart
on page 4-9 are various
option installation screens.
✐