User Manual

USER MAINTENANCE
Your styler is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow to cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.
CAUTION
NEVER allow the USB charging cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the appliance. Damage will occur at the high fl ex point of entry into the appliance, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.
STORAGE
This appliance comes with a heat-resistant storage pouch for use during and after styling. During use, do not place the appliance on any heat-sensitive surface, even when using the storage pouch provided. After use, switch off and unplug the appliance from both the wall outlet and the styler. Immediately wrap the appliance in the storage pouch provided and allow to fully cool down. Do not jerk or strain cord at plug connections. Do not wrap the line cord around the appliance. When storing, keep the cord unplugged from the styler. Continue to keep it out of the reach of children, as it will remain hot for several minutes. Store out of reach of children in a safe, dry location. To protect the plates, store unit with plates closed tightly. IMPORTANT! The outer material is not heat resistant and the appliance should not be placed on this material while hot.
cr400_19pa064721_ib_no_fcc_final.indd 26-27 1/21/20 11:16 AM