Operating instructions

*The extreme left-hand tooth of the cutting
comb must cover or be to the extreme left hand
of the first small tooth of the cutter.
*Be sure that the extreme right hand big tooth
of the cutter touches the extreme right hand
tooth of the cutting comb.
Any other servicing should be performed by an
authorized service representative because this
appliance has no user serviceable parts. The
product is for household use.
Do not pull, twist, or wrap line cord around
appliance.
1. To prevent the clipper from contacting the
skin or cutting too closely, make certain that the
end of the top blade is 1/32” to 1/16” back from
the bottom blade.
2. Position the extreme left-hand tooth of the
top blade so that it either covers, or appears on
the left of the first small tooth on the bottom
blade.
3. Make sure that the big tooth on the bottom
blade touches the extreme right-hand tooth on
the top blade.
SPECIAL OIL
Figure 2:
Cutter
(small blade)
Cutter Comb (large blade)
1/32” 40 1/16”
Blade Screws
Large Blade (cutting comb)
Small Blade (cutter)