Thermostat User Manual

POWER ON
1 888 888
2 sec All LEDs On
2 dC 004
2 sec Software Version
3
res in

(Default Screen)
4 250 250 Process Setpoint and Actual Temp (Default Screen)
Press + or - to change setpoint.
Press Scroll Button
for Process Deviation Alarm Setpoint (Dev)
5 5dEv
+ or - Deviation Band
Press + or - to change setpoint.
Press Scroll to enter the value
Process Screens Process Protection Screens
Press Scroll Button and + key at the Press Scroll Button and + key at the
same time for 2 sec to get in. same time again for 2 sec to get in.
To get out at any time Press Scroll To get out at any time Press Scroll
button and - key at the same time button and - key at the same time
2 Min timer then return to the default screen
6 Pro cES 16 Pro tEc
Press Scroll again to view next screen Press Scroll again to view next screen
7 375 Hi.L
Process High Limit
17 Act 250
Protect Temperature
Press Scroll again to view next screen
Press Scroll again to view next screen
8 3 Lbb
Process Loop Break Band 18 625 H.Al Protect Hi Alarm SP
Press Scroll again to view next screen
Press Scroll again to view next screen
9 10 Lbt
Process Loop Break Time
19 10 H.dL
Protect Hi Alarm Delay
Press Scroll again to view next screen
Press Scroll again to view next screen
10 385 H.AL
Process High Alarm Setpoint 20 300 d.AL Differential Alarm SP
Press Scroll again to view next screen
Press Scroll again to view next screen
11 50 Pb
Process Prop
21 80 d.dL
Differential Alarm Delay
Press Scroll again to view next screen
12 16 int
Process Integral
Press Scroll again to view next screen
Press Scroll again to view the first screen
13 2dEr
Process Derivative
Press Scroll again to view next screen
14 tun OFF
Process Autotune
Press + Key to Start Autotune
Press Scroll again to view next screen
15 F unt
Units degrees F or degrees C
Press + Key to toggle between F and C
Press Scroll again to view the first screen

Press Scroll Button again for Setback
Return Temperature Setpoint
5A
180 Srt
Press Scroll Button again for Process
Setback Temperature Setpoint
5B
140 PSt
Press Scroll to enter the value
(Optional)
Press + or - to change setpoint.
Press Scroll to enter the value
Press + or - to change setpoint.
4-4 l Opera
tion