Thermostat User Manual

Operation

Operation l 4-25

Normal Operation To Stop Heating

1 Turn the heater to “Standby”.

IMPORTANT: Always turn off the HTC BEFORE the dryer or process blower.

2 Allow the HTC to cool to below 100°F (37.8°C).

3 Turn off the blower or dryer.

4 Be sure to disconnect and lockout the main power

if you have stopped the

HTC to perform maintenance or repair.

CAUTION: Improper shut down can cause damage to your heater.

Heaters

tartup /

Shutdown

For Startup:

1. With heaters in

Standby, turn on

blower or dryer.

2. Enable heaters.



For Shutdown:

1. Switch heaters to

Standby. 

2. Wait 60 seconds

before turning off

blower or dryer.

Enable

Standby