Datasheet

Customizing Your Scale
1. To turn on the scale
• Press “Set”.
2. To set the user number
• Within 3 seconds after pressing “set”,
press user 1, 2, 3 or 4 to choose a user number; “P-1”, “P-2”, “P-3” or “P-4”
appears; press “set” to save the user setting.
3. To set the start weight
• When “0.0” appears on the display step onto the scale.
• Adjust your position on the scale according to the leveler
indicators on the display. The indicators show where you
are off center. (Screen below shows that weight needs to be
shifted to the right of the scale.) When center diamond lights
up, it indicates ideal balance for accurate and repeatable weight measurement.
Off-center position Center position
• Weight reading appears on the display with the word “start” illuminated and then
starts to blink.
• Get off the scale, press “set” key to save the reading as a start weight.
4. To set the goal weight
• After start weight is recorded, display automatically moves to the next screen:
goal weight. Goal weight with decimal point will blink with the word “GOAL” illu-
minated. The scale will automatically calculate your goal weight as 10%
off your start weight, in accordance with generally accepted healthy weight man-
agement guidelines.
If goal weight needs to be adjusted up or down from automatically calculated
goal weight, user can press “user 1” or “user 2” button at any time during the 30
seconds before display times out to adjust goal weight. Pressing a user button
will adjust weight up or down by 1lb each time the button is pressed. Pressing
user button 1 will adjust weight up; pressing user button 2 will adjust weight
down.
• Once desired goal weight has been reached, press “set” to confirm goal weight.
NOTE: If goal weight has not been set properly, goal weight in future weight
readings will be incorrect. If that happens, simply repeat customization
procedure.
• Display will turn off.
08AD020 WW43D IB mech.indd 6 1/24/08 4:19:58 PM