LA Controller Product Data Sheet Linear Actuator Controller Standard Features: • • • • • 3 user programmable actuator travel set points 12 VDC (nominal) 7.5 Amp fuse Control box and wired 3-button switch: No IP rating (not waterproof) W orks with Concentric International’s Light Duty and Medium Duty series actuators with potentiometers Concentric International 1901 Bell Ave., Suite 18, Des Moines, IA 50315 www.concentricintl.com Rev.
LA Controller Each Kit Contains the Following Components: • • • • • • (1) (1) (1) (1) (1) (1) Control Unit Control unit wire harness W ired 3-button switch 3-button switch wire harness Double-sided tape Mounting hardware Optional Accessories: • • 10’ Linear actuator cable extension harness (part no: LA-EXTHARN) Linear actuators 2”, 4”, 6”, 8”, 10”, 12” (actuator must have a potentiometer) Explanation / Overview: • This unit features 3 user defined presets that are easily programmed via the wired 3butt
LA Controller To program preset positions 1, 2, and 3: 1. Position the actuator extension tube to where you would like Preset #1 to be loca ted. OR 2. Press and hold the number 1 button for 5 seconds. a. The LED will flash to indicate the setting has been learned and stored. 5 seconds 3. Position the actuator extension tube to where you would like Preset #2 to be located. OR 4. Press and hold the number 2 button for 5 seconds. a. The LED will flash to indicate the setting has been learned and stored.
LA Controller • • • The white, green, and blue wires cannot be used to program preset position s – user must use the wired 3-button switch to program preset positions. The white, green, and blue wires cannot be used in pairs (white & green -or- green & blue) to extend or retract the actuator – user must use the wired 3-button switch to extend or retract the actuator. Proper wiring is critical to the correct operation of this unit.
LA Controller Wiring Diagrams: • LA-CONTROLLER DIP Switches 1&2 Concentric International 1901 Bell Ave., Suite 18, Des Moines, IA 50315 www.concentricintl.com Rev.
LA Controller • LA-CONTROLLER with Optional Momentary Push Buttons Concentric International 1901 Bell Ave., Suite 18, Des Moines, IA 50315 www.concentricintl.com Rev.
LA Controller • LA-CONTROLLER Wire Connections Concentric International 1901 Bell Ave., Suite 18, Des Moines, IA 50315 www.concentricintl.com Rev.
LA Controller Mounting: The control unit and the wired 3-button switch must be mounted out of the weather to avoid moisture (they are not waterproof). The wired 3-button switch can be mounted in a variety of ways. Below you will find some mounting options. Use the supplied double-sided tape to mount the switch to any flat surface. Use the supplied mounting bolts and support bracket for a more secure mounting option. The support bracket can be used as a template for marking and drilling the mounting holes.
LA Controller DIP Switch Settings: After changing DIP switch settings, you must cycle the power to the LA-Controller for the change to take effect. DIP Switch #1 OFF DIP Switch #2 OFF (switch position up) (switch position up) W ith power applied to the LA-Controller – without power applied to the YELLOW ignition wire: • All buttons on the wired 3-button switch function normally. • All 3 wires for the optional push button input switches function normally.
LA Controller DIP Switch #1 OFF DIP Switch #2 ON (switch position up) (switch position down) W hen power is first applied to the LA -Controller – without power applied to the YELLOW ignition wire: • Actuator extension stays where it is at power up. • The wired 3-button switch functions normally. • All 3 wires for the optional push button input switches function normally. W ith power applied to the YELLOW ignition wire: • Actuator extension moves to preset #2.
LA Controller Ordering Key: Part Number Description LA-CONTROLLER LA-EXTHARN LACT-KEYPAD LACT-KEYPADHARN LACT-MAINHARN Controller 3-Position 10’ extension wire harness for LA-Controller/actuator connection 3-Button keypad, 3-button keypad harness, multi-colored main harness Wire harness for LA-Controller keypad Main harness for LA-Controller Terms of Use The user is responsible for determining the suitability of Concentric International products for specific applications.
