Product Manual

ManualsBrandsConcentric ManualsElectric ActuatorsGlideforce 500-Lb. Capacity ID-ACME Linear Actuator — 12in. Stroke

Concentric International

1901 Bell Ave., Suite 18, Des Moines, IA 50315

www.concentricintl.com

Rev. 20180226

Page 1 of 12

LINEAR ACTUATOR

INDUSTRIAL DUTY

LACT SERIES

Product Data Sheet

Standard Features:

• All steel frame and extension tube

o Aluminum gearbox housing

o Ball screw version has stainless steel extension tube

• Nominal stroke lengths: 4” [102mm], 6” [152mm ], 8” [203mm],

12” [305mm], 18” [457mm], 24” [610mm], [other stroke lengths available]

• Input voltage: 12VDC, 24VDC

• Standard gear ratio: 20:1 [other ratios available]

• Rated load range: 337 lbs. [1,500 Newtons] -to- 1,574 lbs. [7,000 Newtons]

• Maximum static load: 1,012 lbs. [ 4,500 Newtons] (ACME)

3,057 lbs. [13,600 Newtons] (Ball Screw)

• Maximum current draw (at full load): 11.0 -to- 26.4 Amps @ 12 VDC

• Speed at no load: 0.33 in/sec [8.4 mm/sec] -to- 2.64 in/sec [67.1 mm/sec]

• Speed at full load: 0.29 in/sec [7.4 mm/sec] -to- 1.86 in/sec [47.2 mm/sec]

• Overload clutch

• Mounting hole diameter (both ends): 1/2” [13mm]

• Duty cycle: 25% or 2 min continuous operation in 8 min.

• Working temperature: -13F [-25C] +149F [+65C]

• IP rating: IP65

Accessories:

• Mounting brackets

• Direction reversing switches

• Direction reversing relays

• Direction reversing wireless controllers

Summary of content (12 pages)

PAGE 1
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES Product Data Sheet Standard Features: • • • • • • • • • • • • • • All steel frame and extension tube o Aluminum gearbox housing o Ball screw version has stainless steel extension tube Nominal stroke lengths: 4” [102mm], 6” [152mm], 8” [203mm], 12” [305mm], 18” [457mm], 24” [610mm], [other stroke lengths available] Input voltage: 12VDC, 24VDC Standard gear ratio: 20:1 [other ratios available] Rated load range: 337 lbs. [1 ,500 Newtons] -to- 1,574 lbs.
PAGE 2
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES LACT Series – ACME Screw Dimensions – Standard (without Limit Switches or Potentiometer) Nominal Stroke Actual Stroke (S) Retracted Length (A) Extended Length 4” 6” 8” 12” 18” 24” in mm in mm in mm in mm in mm in mm 4.02 102 6.02 153 8.03 204 12.05 306 18.07 459 24.09 612 10.24 260 12.24 311 14.25 362 18.27 464 27.20 691 33.23 844 14.25 362 18.27 464 22.28 566 30.31 770 45.28 1150 57.32 1456 Stroke: +/- 0.
PAGE 3
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES LACT Series – ACME Screw Dimensions – With Potentiometer Only Nominal Stroke Actual Stroke (S) Retracted Length (A) Extended Length 4” 6” 8” 12” 18” 24” in mm in mm in mm in mm in mm in mm 4.02 102 6.02 153 8.03 204 12.05 306 18.07 459 24.09 612 11.81 300 13.82 351 15.83 402 19.84 504 28.78 731 33.23 844 15.83 402 19.84 504 23.86 606 31.89 810 46.85 1190 57.32 1456 Stroke: +/- 0.
PAGE 4
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES LACT Series – ACME Screw Dimensions – With Only Limit Switches or Limit Switches and Potentiometer Nominal Stroke Actual Stroke (S) Retracted Length (A) Extended Length 4” 6” 8” 12” 18” 24” in mm in mm in mm in mm in mm in mm 3.50 89 5.51 140 7.52 191 11.54 293 17.56 446 23.58 599 12.05 306 14.06 357 16.06 408 20.08 510 29.02 737 35.04 890 15.55 395 19.57 497 23.58 599 31.61 803 46.57 1183 58.
PAGE 5
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES Performance Data – Gear Ratio LACT Series – ACME Screw Max Load/Dynamic Speed/No Load Speed/Max Load 10:1 Lbs. [US] 337 Newtons 1500 inches/sec 1.32 mm/sec 33.5 inches/sec 1.05 mm/sec 26.7 20:1 40:1 562 787 2500 3500 0.66 0.33 16.8 8.4 0.56 0.29 14.3 7.4 Gear Ratio 10:1 20:1 40:1 Typical Current (A) No Load 12 VDC 2.4 2.4 2.4 Full Load 24 VDC 1.2 1.2 1.2 12 VDC 17.6 13.2 11.0 24 VDC 8.8 6.6 5.5 Concentric International 1901 Bell Ave.
PAGE 6
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES LACT Series – Ball Screw Dimensions – Standard (without Limit Switches or Potentiometer) Nominal Stroke Actual Stroke (S) Retracted Length (A) Extended Length 4” 6” 8” 12” 18” 24” in mm in mm in mm in mm in mm in mm 3.31 84 5.31 135 7.32 186 11.34 288 17.99 457 24.02 610 12.05 306 14.06 357 16.06 408 20.08 510 29.02 737 35.04 890 15.35 390 19.37 492 23.39 594 31.42 798 47.01 1194 59.06 1500 Stroke: +/- 0.
PAGE 7
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES LACT Series – Ball Screw Dimensions – With Potentiometer Only Nominal Stroke Actual Stroke (S) Retracted Length (A) Extended Length 4” 6” 8” 12” 18” 24” in mm in mm in mm in mm in mm in mm 3.31 84 5.31 135 7.32 186 11.34 288 17.99 457 24.02 610 13.62 346 15.63 397 17.64 448 21.65 550 30.59 777 36.61 930 16.93 430 20.94 532 24.96 634 32.99 838 48.58 1234 60.63 1540 Stroke: +/- 0.
PAGE 8
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES LACT Series – Ball Screw Dimensions – With Only Limit Switches or Limit Switches and Potentiometer Nominal Stroke Actual Stroke (S) Retracted Length (A) Extended Length 4” 6” 8” 12” 18” 24” in mm in mm in mm in mm in mm in mm 2.80 71 4.80 122 6.81 173 10.83 275 17.56 446 23.58 599 13.86 352 15.87 403 17.87 454 21.89 556 30.83 783 36.85 936 16.65 423 20.67 525 24.69 627 32.72 831 48.39 1229 60.
PAGE 9
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES Performance Data – Gear Ratio LACT Series – Ball Screw Max Load/Dynamic Speed/No Load Speed/Max Load 5:1 10:1 20:1 Lbs. [US] 562 787 1012 Newtons 2500 3500 4500 inches/sec 2.64 1.32 0.66 mm/sec 67.1 33.5 16.8 inches/sec 1.86 1.05 0.56 mm/sec 47.2 26.7 14.3 30:1 40:1 1349 1574 6000 7000 0.44 0.33 11.2 8.4 0.39 0.29 9.8 7.4 Gear Ratio 5:1 10:1 20:1 30:1 40:1 Typical Current (A) No Load 12 VDC 2.4 2.4 2.4 2.4 2.4 Full Load 24 VDC 1.2 1.2 1.2 1.
PAGE 10
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES Electrical Standard Gear Ratio: 5:1, 10:1, 20:1 Red + // Black - : Extend Red - // Black + : Retract Gear Ratio: 30:1, 40:1 Red + // Black - : Retract Red - // Black + : Extend With Limit Switches Gear Ratio: 5:1, 10:1, 20:1, 30:1, 40:1 Red + // Black - : Extend Red - // Black + : Retract With Potentiometer (or Limit Switches and Potentiometer) Gear Ratio: 5:1, 10:1, 20:1, 30:1, 40:1 Red + // Black - : Extend Red - // Black + : Retract Concentric International
PAGE 11
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES Potentiometer Actuator extending Value of POT The Ohm value between the blue and white wires Nominal Stroke Resistance (in / mm) 3.94 / 100 0.3 – 8.1 K 5.91 / 150 0.3 – 8.7 K 7.87 / 200 0.3 – 9.2 K 11.81 / 300 0.3 – 8.8 K 17.99 / 457 0.3 – 9.4 K 24.02 / 610 0.3 – 9.8 K Tolerance: +/- 0.3K Values in this table are an approximation. Actual values will vary due to actuator configuration and construction.
PAGE 12
LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES Ordering Key LACT – – Stroke (nominal) 4 : 4” [102mm] 6 : 6” [153mm] 8 : 8” [203mm] 12 : 12” [305mm] 18 : 18” [457mm] 24 : 24” [610mm] Additional stroke lengths available Drive Type 500A : AMCE Screw (562 lbs. @ 20:1) 1000B : Ball Screw (1012 lbs.