Installation & Assembly

Convertible Wine Racks
Models WR-40528, WR-44528,
WR-49528 and WR-49526
Page 1
Concept Housewares, A Division of PR Housewares, LLC
www.prhousewares.com Email: [e-mail]
Photo A - Fully Assembled
Photo C - Hanging links
Photo D - Glass holder
B2 - ScrewsB1 - Hooks
Assembly:
To install, you will need the following:
- Pencil and tape measure
- Philips screwdriver if needed and pliers
- Electric drill with assorted bits
Parts:
- Main unit (See Photo – A)
- Package of ceiling hooks (8) or wall mounting screws and
anchors (See Photo – B1 or B2)
- 4 packs of PR-41202 hanging links, for hanging installations
(See Photo – C)
- Glass holders (Secure to wine rack in pre-drilled holes. Do not
overtighten.) (See Photo – D)
Please consult with your local hardware store if you have any
questions or concerns about the construction of your walls or
ceilings. ey can assist you in selecting the proper hardware
and procedures. e generic hardware provided will work for
most applications. Always measure twice before drilling.
NOTE: If you have any doubt about your installation or your
ceilings ability to oer the proper support for your wine rack,
please contact a professional.
Mounting Directions:
Mounting Directions (Hanging):
Attached 4 supplied hooks to wine rack in pre-drilled holes.
Make secure but don’t over tighten. Determine where ceiling joist
(beams, studs) are located. Place ceiling hooks so that the hanging
links will hang straight down from the ceiling. It is important
the ceiling hooks are secure within the joists so they will bear the
weight of the rack and any glassware.
Mounting Directions (Wall Mount):
Assemble rack with all supports, then with rough frame work
constructed use as a guide for installation. Measure carefully
where you want to mount the rack on the wall use a pencil to
mark where the screws attach to the wall.
Continued on page 2 →