Installation & Assembly

Convertible Wine Racks
Models WR-40528, WR-44528,
WR-49528 and WR-49526
Page 2
Concept Housewares, A Division of PR Housewares, LLC
www.prhousewares.com Email: [e-mail]
Photo E - Drill 5/16” diameter
(8mm) hole. Fold anchor in middle.
Photo F - Insert anchor in hole
and tap ush with wall.
Photo G - Insert key to pop anchor
open & lock behind hollow wall
(not necessary for thick or solid
walls). Do not force of hammer key.
Photo H - Place item over anchor. Insert screw and
tighten untill screw is ush with xture. Then, stop.
The anchors also wedge securely in thick or solid
walls, or in wood studs behind drywall.
Photo I - correct (top) and
incorrect (bottom).
Questions - Comments
Damaged ‐ Defective ‐ Missing Parts
Contact us rst, we will respond within 24 hours or less. Please provide our part number, your order number,
place of purchase, address and any other info so we may address your concerns promptly.
[e-mail] or www.prhousewares.com
Returns are only accepted when returned in new condition and only with an RMA from the seller.
Returns to: 501 I South Reino Rd. Ste 152. Newbury Park, CA 91320
Remove the unit and drill holes using a 5/16” drill bit. When / if possible mount to a wall stud. Supplied anchors
have a pull rating of 20 lbs. or more each and a shear rating of 50 lbs. each.
Insert the anchors into the drilled holes. ey may need to be tapped in gently with a hammer. Use the supplied
key to expand the anchor behind drywall. (See Photos E to I for proper and improper anchor install). Use supplied
screws to attach.
Additional links and available. See www.prhousewares.com for a list of parts and e-tailers.