User`s manual

ENGLISH

2.2 Back panel

Nr Description Explanation

1 Wireless antennas (2x) Two fixed antennas for wireless broadcasting

2 Radio ON/OFF switch Turn the wireless radio on or off

3 Reset/WPS button Activate WPS function (short press) or perform a reset (hold)

4 LAN ports (1 – 4) Connect your computer(s)/network device(s) to the router

5 WAN port Connect your broadband connection to the router

6 Power connection Connect the power supply to the router

3. Connecting the cables

Connect the power supply to the power connection on the back of the C150BRS4 and to an available wall

socket. The power LED on the front of the C150BRS4 will lit up.

3.1 WAN port

Use a network (LAN) cable to connect the C150BRS4 to your broadband modem.

The WAN LED on the front of the C150BRS4 will lit up.

Note: If the WAN LED on the front does not lit up, make sure that:

- The C150BRS4 is powered on (the power LED should burn).

- The broadband modem is turned on.

- The network (LAN) cable between both devices is connected correctly.

3.2 LAN port(s)

Connect the network (LAN) cable to 1 of the 4 LAN ports on the back panel of the C150BRS4 and to the

network card of your computer.

The LAN LED of the used LAN port will lit up, indicating that the computer is connected. (Your computer

must be switched on and the LAN connection must be enabled).