User's installation and operation Manual Important Safeguards and Warding Do not place heavy objects on the DVR. Do not let any solid or liquid fall into or infiltrate the DVR Please brush printed circuit boards,connectors,fans,machine box and so on regularly.Before the dust cleaning please switch off the power and unplug it. Do not disassemble or repair the DVR by yourself.Do not replace the components by yourself. Environment Please place and use the DVR between 0℃ and 40℃.Avoid direct sunlight.
Directory 1 Production Introduction ........................................................................................................................................ 4 1.1 Product overview .......................................................................................................................................... 4 1.2 Main functions ..............................................................................................................................................
4.4.6 PTZ device /RS485 device ......................................................................................................... 44 4.4.7 Tour ................................................................................................................................................. 45 4.4.8 Channel manage .......................................................................................................................... 46 4.5 Advanced.....................................................
1 Production Introduction 1.1 Product overview The series DVR is designed specifically for security and defence field which is an outstanding digital surveillance product. It introduces embedded LINUX operating system which is more stable. It introduces standard H.264mp video compressed format and G.711A audio compressed format which insures the high quality image, low error coding ratio and single frame playing.
·individual real-time video recording as well as searching, playback, network surveillance, recording check, downloading and so on ·multi-playback mode ·zoom at arbitrary region Net operating ·through net tele-surveillance in the real time ·tele-PTZ control ·tele-recording check and real-time playback Alarm linkage ·Alarm activated video record, tour ,message, buzzer, e-mail, ftp Communication interface ·RS485 interface which fulfills the alarm input and PTZ control ·standard ethernet network interface whic
1.Front panel and rear panel The key function specification in the front panel and the interface specification in the real panel are in the specification. Please check the product type in the front panel whether is accordant with the product type you order. The label in the real panel is very important for the after service. Please protect it carefully. When you contact us for after service, please provide the product type and serial number in the label. 2.
2.3 Front panel 2.5 Rear panel The rear panel of 4/8channel series 3 6 4 1 2 8 5 9 7 1. Video input (4channel:Video1-4,8channel:Video5-8) 2. Audio output 3. VGA output 4. HDMI output 5. Audio input 6. Network port 7. USB port 8. RS485 port 9. Power input 2.6 Audio and video input and output connections 2.6.1 Video input connections The video input port is BNC connector plug. The demand of input signal is PAL/NTSC BNC(1.0VP-P,75Ω).
low aberration and low interference. The image must be clear and has natural color in the appropriate brightness. Insure the camera signal stable and credible The camera should be installed in the appropriate location where is away from backlighting and low illumination or adopts the better backlighting and low illumination compensation. The ground and power supply of the camera and the DVR should be shared and stable.
2.6.4 Audio signal output Commonly the output parameter of DVR audio signal is greater than 200mv 1KΩ(RCA) which can connect the low impedance earphone and active sound box or other audio output equipments through power amplifier. If the sound box and the tone arm can not be isolated, howling phenomena is often existed. There are some methods to deal with the above phenomena. 1、 Adopt better directional tone arm. 2、 Adjust the sound box volume to be under the threshold that produces the howling phenomena.
shining and the DVR is working normally. Note:1. Make sure that the input voltage corresponds with the switch of the DVR power supply. 2. Power adapter supply demands: 12V±10% . 3.1 Turn off There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the [turn off the system] option is called soft switch. Pressing the power supply switch is called hard switch.
Picture 3.1 System Login Password protection: If the password is continuous wrong three times, the alarm will start. If the password is continuous wrong five times, the account will be locked. (Through reboot or after half an hour, the account will be unlocked automatically). For your system security, please modify your password after first login. 3.4 Preview You can right click mouse to choose the switch between the windows. The system date, time and channel name are shown in each viewing window.
*compare to analog/hybrid mode's shortcut menu,the full digital mode do not have color setting function. 3.5.1 Main menu When you login, the system main menu is shown as below. Picture3.3 Main Menu 3.5.2 Playback There are two methods for you to play the video files in the hard disk. 1、 In the desktop shortcut menu. 2、 Main menu>Record->Playback Note: The hard disk that saves the video files must be set as read-write or read-only state.(4.5.1).
4 5 3 1 2 Picture 3.4 video playback 1. Playback control 2. Process bar 3. file searching 4. listed files 5. file information 【Listed files】Look up the listed files that accord with the searching criteria. 【File information】Look up the found file information. 【Playback control】See detail in below chart Key / Function Key Function Play/Pause Backward play Slow forward Fast forward Previous frame Next frame Previous file Next file Round play Full screen Stop Picture 3.
mouse to exit. Note: When current resolution of the channel is over Max resolution, to playback this channel, will show a Red “X”. 3.5.3 Record Control Please check current channel status: “○” means it is not in recording status, “●” means it is in recording status. You can use desktop shortcut menu or click [main menu]> [recording function]> [recording set] to enter the recording control interface. Picture 3.8 Record Mode 【Schedule】Record according to the configuration.
3. The PTZ functions are decided by the PTZ protocols. Picture 3.10 PTZ setup 【Speed】Set the PTZ rotation range. Default range: 1 ~ 8. 【Zoom】Click / button to adjust the zoom multiple of the camera. 【Focus】Click / button to adjust the focus of the camera . 【Iris】Click / button to adjust the iris of the camera. 【Hide】Current interface will be temporarily hidden after click it. 【Direction control】Control the PTZ rotation. 8 directions control is supportive.
Step 2: click the Preset button , then write the preset points in the input blank, Step 3: click Settings button, return the Picture 3.10 Complete setup, that is the preset points and preset position corresponds. Clear Preset：Input preset points, click Remove button, remove the preset. Preset point input blank Preset button Picture 3.11 Preset Settings 2）Preset Point Calls In Picture 3.10, click Page Shift button, enter PTZ control interface as shown in Picture 3.12.
Step1: In Picture 3.10, the Direction key will turn PTZ to designated location , click Settings button to enter Picture 3.
Scan value blank Scan Button Picture 3.14 Scan Setup 2）Scan Calls In Picture 3.10, click Page Shift button, then enter PTZ control menu as shown in Picture 3.12. Please input the number of scan in the value blank , then click Scan button，PTZ begins to work on the scan line . Click Stop button to stop.
Left/Right scan setting button Line scan button border Picture 3.15 Boundary Scan Setup 2）Boundary Scan Calls In Picture 3.10, click Page Shift button, then enter PTZ control menu as shown in Picture 3.12. Please input the number of scan in the value blank , then click Scan button，PTZ begins to work on the scan line . Click Stop button to stop. 5、Horizontal Rotating Click Horizontally Rotating button, PTZ begins to rotate horizontally (relative to the original position of the camera).
【Intuitive Auxiliary Operation】 choose auxiliary equipment, select Open or Close button, switch control； 【 Auxiliary Number 】 The operation of corresponding auxiliary switch according to PTZ agreement； 【Page Shift】In Picture 3.16，click Page Shift button enter the Picture 3.17 PTZ Main Menu , the menu itself can be control by the menu control buttons 3.5.5 Color setting *color setting only apply for Hybrid(HVR)/full analog(DVR) mode,and only analog channel can setting.
Picture 3.19 Output Adjust Note: The black margin vertical & horizontal at output adjust of hybrid mode is only effect to analog channel. 3.5.8 Logout Logout, shut down the system or reboot up. You can use the desktop shortcut menu or enter [main menu]. Picture 3.20 Logout/Shutdown/Reboot the system 【logout】Quit the menu. Offer password next entrance. 【shut down】Quit the system. Turn off the power supply. When press the shut down button, there is schedule hint.
Note：different video input number have different switchable preview picture. 4 Main menu 4.
Net Service PPPOE、NTP、Email、IP purview、DDNS parameter Set channel title, preview hint icon state, transparency, cover area, time title, channel title fold. GUI display Note ： only analog channel can set channel name,region cover ,time title,channel title fold.
Export the device's log or configuration to external device(like USB Import/Export flash disk);Input the configuration with external device(like USB flash disk). Hard disk Display hard disk capability and recording time information BPS Display code stream information System information Log Clear all log information according to the log video and time information Edition Display edition information information Shut down Logout, shut down or reboot 4.
【Channel】Choose the corresponding channel number to set the channel. Choose the all option to set the entire channels. 【Redundancy】Choose the redundancy function option to implement the file double backup function. Double backup is writing the video files in two hard disks. When you do the double backup, make sure that there are two hard disks installed. One is read-write disk and the other is redundant disk. (refer to 4.5.1) 【Length】Set the time length of each video file. 60minutes is default value.
Picture 4.2 Backup 【Detect】Detect the storage connected with the DVR such as hard disk or universal disk. 【Backup】Click backup button and the dialog box is popped up. You can choose the backup file according to the type, channel and time. Picture 4.3 Backup Remove：Clear the file information. Add：Show the file information satisfying the set file attributes.
Backup format：configurate the backup file format,according to require,can choose Start/pause：Click the play button to start the backup and click the pause button to stop the backup. Note：During backup you can exit the page layout to carry out other functions. 【Burning】the file will be burned synchronously after click it. 【Erase】Choose the file to delete and click erasure to delete the file. 【Stop】Stop the backup. 4.
Pic 4.4 motion detection 【Channel】Choose the set motion detect channel. 【Enable】■ means that the motion detect function is on. 【Sensitivity】Choose in the six options according to the sensitivity. . Note: Only the motion detect under hybrid mode/ full analog mode have this function of setting sensitivity, and also only the analog channel can set region. 【Region】Click [set] to enter the set area. The area is divided into 16X12. Red block means the motion detect defensive area.
Picture 4.6 set the time section 【Interval】Only one alarm signal is turned on even there are several motion detect signals in the set interval. 【Alarm output】Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on. 【Delay】Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds. 【Record channel】Choose the recording channel (multiple option supportive). Trigger the video signal when the alarm is turned on.
Picture 4.7 PTZ Activation under hybrid mode 【Delay】When alarm is over,recording will last some seconds(10~300sec),then stop. 【Show message】Pop the alarm information dialog box in the local host computer screen. 【Send EMAIL】■ means sending an email to user when the alarm is turned on. Note:Set in the [NetService] and send email. 【FTP upload】to tick it, the video & picture of related record channel & snapshot channel will be uploaded to assigned position.
Pic 4.8 Video blind Set method: refer to chapter 4.3.1. Motion detect 4.3.3 Video Loss When the equipment can not obtain the channel video signal, the video loss alarm is turned on and the linkage function is turned on. *Same as motion detect function, video loss is different between Hybrid mode & Full digital mode: Digital channel: not only to enable video loss function at local side, but also to enable the remote device that was connected.
Pic 4.9 Video loss Set method: refer to chapter 4.3.1. Motion detect 4.3.4 Abnormal Analysing and inspecting current software and hardware of the device: When some abnormal events happen,the device will make a relative answer such as show message and buzzer. Picture 4.
【Event Type】 【Enable】 【Show message】 【Buzzer】 selecting abnormity you want to inspect Select it to make sure abnormal function workable Automatically alarm cue dialog box come out of the main screen Device will have one long nosie “di” while alarm is happening 4.4 System setup Set the system parameters such as General, Encode（under Hybrid/full analog mode） 、Network, Net service、GUI display、PTZ configure/RS485 device、RS232、Tour setup、Spot and digital。 4.4.1 General Picture 4.
ese,S-Chinese,Turkish,Brazilian,Bulgarian,Farsi,French,German,Hebrew,Hungarian,Polish,Romanian,Spani sh,Swedish,Vietnamese 【HDD full】Choose stop record: Stop recording when the hard disk is full. Choose overwrite: Cover the earliest recording files and continue recording when the hard disk is full. 【DVR No.】Only when the address button in the remote controller and the corresponding DVR number is matched, the remote operation is valid. 【Video Standard】PAL or NTSC. 【Auto Logout】Set the latency time in 0-60.
playback simultaneously, Dial-up multi-channel real-time monitor under poor bandwidth, or mobile monitor and so on. Picture 4.20 Encode setup Independent channel code setting 【Channel】Choose the channel number. 【Compression】Standard H.264 main profile. 【Resolution】Resolution type:AHDM/AHDL/D1/CIF/QCIF. 【Frame Rate】P:1 frame/s~25 frame/s; N: 1 frame/s~30 frame/s 【Bit Rate Type】You can choose limited code stream or variable code stream.
【Channel title】select channel title and then to choose whether need enable video & audio. The resolution, frame rate, bit rate type settings is the same as main stream. 4.4.3 Network setup Picture4.21 Network 【Net Card】You can choose cable network card or wireless network card. 【DHCP Enable】Obtain IP address automatically(not suggested) Note：DHCP server is preinstalled. 【IP address】Set the IP address. Default: 192.168.1.10. 【Subnet mask】Set the subnet mask code. Default: 255.255.255.0.
valid only when the assistant code stream is turned on. Otherwise image quality precedence is valid. 4.4.4 NetService Choose the network service option and click the set button to configure the advanced network functions or double click the service button to configure the parameters. Picture 4.22 NetService 【PPPoE setup】 Picture4.23 PPPOE Enable：Reverse■ means choose,setting can become effective. Input the user name and password that ISP（Internet service provider）provides.
【NTP setup】 Picture 4.24 NTP The NTP server must be installed in the PC. Enable：Reverse■mean choose，setting can become effective. Host computer IP:Input the IP address installed NTP server. Port:Default: 123. You can set the port according to NTP server.
Picture 4.25 EMAIL SMTP server:Email server address. It could be an IP address or domain name. Domain name can be translated only it is the correct DNS configuration. Port:Email server port number. SSL:Decide whether using Secure Socket Layer protocol to login. User Name:Apply the email server user name. Password:Input the password corresponding to the user. Sender:Set the email sender address. Receiver:Send the email to appointed receivers when the alarm is turned on. You can set three receivers at most.
Picture 4.26 IP FILTER 【DDNS】 Picture 4.27 DDNS setup It is the abbreviation of dynamic domain name server. Local domain name：Provide the domain name registered by DDNS. User name：Provide the account registered by DDNS. Password：Provide the password registered by DDNS. When the DDNS is successfully configured and start, you can connect the domain name in the IE address column to visit. Note：The DNS setup must be configured correctly in the network setup.
Picture 4.28 FTP setup 【Enable】Click Enable,then all settings will be available 【Server IP】IP address for FTP server 【Port】Domain Port of FTP,default 21 【User Name】User name of FTP 【Password】Password of user 【Anonymous】 ：enable anonymous,no need setting user name and password 【Max File Length】Max length for upload files at every packed,default 128M 【Dir Name】 ：The directory of upload file. Note: The user should be with authority to upload files.
【UPNP】 UPNP protocol is to realize auto port forwarding on router, precondition of using this function is to make sure the UPNP function of router is enabled. Picture 4.33 UPNP 【Enable】Choose Enable to make sure all UPNP settings available 【HTTP】Route will automatically distribute HTTP port for the device,when IE viewing,it need this port 【TCP】Router will automatically distribute TCP port for the device,when monitoring via CMS,it need this port.
4.4.5 GUI Display Configure the video output parameters including the front output mode and encode output mode. Front output：In the local preview mode include: channel title, time display, channel display, record status, alarm status, transparency and region cover. Encode output：In the network surveillance and video file mode include: channel title, time display, channel display, record status, alarm status, transparency and region cover. Pic 4.
【Channel】Choose the set code output channel number. 【Region Cover】means the selective state. Click the cover area button and enter the corresponding channel window. You can cover the arbitrary using mouse. (Black region is for output) 【Time display】and 【Channel display】 set the display position of channel title and time title. 4.4.6 PTZ device /RS485 device * when under hybrid mode/full digital mode, it shows with PTZ device and RS485 device, Pic 4.
4.38 RS485 device 【Protocol】choose related protocol of brand model； 【Address】set with corresponding address, default is 1； 【Baud rate】choose bard rate that related device use, default is 115200； 【Data bits】including 5-8 options，default is 8； 【Stop bits】including 2 options, default is 1； 【Parity】Include odd check, even check, sign check, blank check. Default: void. 4.4.7 Tour Set the patrol display. means that the tour mode is enable.
【interval】Set the patrol switch interval. The set range is 5-120 seconds. 【alarm tour】set the interval to shift alarm tour, range is 5-120 seconds, choose return when alarm ends, when alarm link to tour, system will auto shift to six-view after alarm finished. Remark：at preview mode, click upper right icon / can turn on / off tour（ mean turn on, mean turn off）. 4.4.
Digital channel: Single link page of digital channel Multi-linkage page of Digital channel Pic 4.43 digital channel interface 【Channel】select channel title 【Enable】Open digital channel, tick enable, then can do related settings 【Time Synchronization】Tick it means the time of this channel and device is the same.
Pic 4.44 remote channel configure page 【Configure Name】device is with default configure title, user can revise it if necessary； 【Device Type】3 types: IPC、DVR、HVR，user can choose as what you like, default is IPC； 【Protocol】Default is TCP 【Remote channel】User can input remote channel title from the device that you want to connect remotely 【Stream】Default is main stream, do not support extra-stream at present； 【Device address】IP address of device.
Channel Status: channel status is to show the status of all the digital channel When there is what existing, status including Max Resolution, This Resolution, Connection Status.
Remark: when the current resolution is over the max resolution that the channel supported, then a red “X” will be shown on the preview image, for example: Under full digital channel mode, Max resolution of channel 3 is D1, if it was connected to a device with resolution over D1 ( such as 960H), you will see below pic: Channel mode: Remark: this series of product with full analog channel mode, hybrid mode and full digital mode, and different model with different channel mode, user can shift the mode freely
4.5 Advanced Manage tools menu including: HDD manage, account manage, online user, output adjust, auto maintain, upgrade. 4.5.1 HDD Manage Configure and manage the hard disk. The menu displays current hard disk information: hard disk number, input port, type, status and overall capability. The operation include: setup the write-read disk, read-only disk, redundant disk, hard disk format, resume default. Choose the hard disk and click the right function button to execute.
2. There is no limit in the user and user group. You can add or delete the user group according to user definition. The factory setup include: user\admin. You can set the team as you wish. The user can appoint the purview in the group. 3. The user management include: group/ user. The group and user name can not be the same. Each user only belongs to one group. Pic 4.47 account management 【Modify User】Modify the existed user attribute. 【Modify Group】Modify the existed team attribute.
【Add user】Add a user in the group and set the user purview. Enter the menu interface and input the user name and password. Choose the team and choose whether cover using the user. Cover using means that the account can be used by multiple users at the same time. Once choose the team the user purview is the subclass of the team. We recommend that the common user’s purview is lower than the advanced user. Pic 4.49 Add User 【Add Group】Add a user group and set the purview.
【Delete User】Delete the current user. Choose the user and click delete user button. 【Delete Group】Delete the current group. Choose the group and click delete group button. Pic 4.51 Delete Group 4.5.3 Online user To check the information of network user that connected with local device, also can tick the selected user to break up connection,（make √ at the box） ，then the user will be frozen after connection stopped, and will not log in until device reboot. Pic 4.
4.5.4 Output adjust Refer to chapter 3.5.7 . 4.5.5 Auto Maintain The user can set the time to auto reboot and auto delete file. Picture 4.39 Auto maintain 4.5.6 Restore The system restore to the default . You can choose the items according to the menu. Pic 4.
4.5.7 Upgrade Pic 4.55 Upgrade 【Upgrade】choose USB interface. 【Upgrade file】choose the upgrade file. 4.5.8 Device Info Provide device interface info like audio in,alarm in/out to be conveniently used for user. Pic 4.56 device info 4.5.9 Import / Export Users can export the log info and the configure file from device to connected flash stick, and also can import related configure file from flash stick to settings, which greatly bring convenience to the customers.
4.57 Import / Export interface 4.6 Info Display the hard disk information, including HDD info, code stream statistic, log info, version info 4.6.1 HDD info Display the hard disk state: hard disk type, overall capability, residual capability, the recording time and so on. Pic 4.
Tips：○ means that the hard disk is normal. X means that the hard disk is broken-down.- means that there is no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR and take up all the damaged hard disks,then install a new one. * behind serial number means the current working disk such as 1*. If the corresponding disk is damaged, the information will show “？”. 4.6.2 BPS Display the code stream（Kb/S）and hard disk capability （MB/H）in real time.
Pic: 4.60 Log information 4.6.4 Version Display the basic information such as hardware information, software version, issue date, serial number , NAT status and so on. Pic 4.61 version information 4.7 Shut down system Refer to chapter 3.5.8.
Chapter 5: Cloud Technology Basic Operation 5.1 Cloud technology monitor Cloud technology make the device one step on net, greatly bring convenience for customer to monitor via wide area network, this technology is using the serial no to visit device. *Remark：the device that using cloud technology should be in the WAN( Wide Area Network )firstly.
Log in by user Customer use their registered user name and password to log in, will see below interface Pic 5.3 cloud technology operation interface Device manage Mainly use to add device, click “add”to add the serial number of device to be monitored.
Pic 5.4 device manage interface Pic 5.5 add interface at device manage *Remark：in pic 5.5, the user name means the user name of monitored device, password means the password of related user. My Device Mainly show all the added device here, click the on-line device name, can access to control this device accordingly.
Pic 5.6 monitor page - log in by user *Remark：the icon of“ ” means offline, the device do not connect to server successfully. Log in by device Pic 5.7 interface of log in by device Input the serial number of device and the verify code to monitor and control the device directly.
Pic: 5.
6 FAQ and maintenance 6.1 FAQ If the problems are not listed, please contact the local service or call the HQ service. We are willing to offer the service. 1、 The DVR can not boot up normally. Possible reasons are as followed: 2、 1 The power supply is not correct. 2 Switch power supply line is not in good connection. 3 Switch power supply is damaged. 4 The program updating is wrong. 5 The hard disk is damaged or the hard disk lines are broken. 6 The front panel is damaged.
4、 There are no video outputs in single channel, multiple channels and all channels. Possible reasons are as followed: 5、 1 The program is not matched. Please update the program. 2 The image brightness is all 0. Please restore the default setup. 3 There is no video input signal or the signal is too weak. 4 The channel protection or the screen protection is set. 5 The hardware of the DVR is damaged. Real-time image problems such as the image color or the brightness distortion.
Possible reasons are as followed: 9、 1 It is not an active tone arm. 2 It is not an active sound box. 3 The audio lines are damaged. 4 The hardware of the DVR is damaged. There is audio signal in the surveillance window but mo audio signal in the playback state. Possible reasons are as followed: 10、 1 Setting issues: the audio option is not chosen. 2 The according channel is not connected with the video. The time is wrong. Possible reasons are as followed: 11、 1 Setting is wrong..
13、 2 The motion detect area set is not correct. 3 The sensitivity is too low. 4 Limited by some hardware edition. I can not login via web or CMS. Possible reasons are as followed: 1 The system is windows 98 or win me. We recommend updating to windows 2000sp4 or higher Version or installing the software for low edition. 2 14、 ActiveX is hold back. 3 The version is not exceeded dx8.1. Update the display card driver. 4 Network connection failure. 5 Network setting issues.
17、 1 The rewritable machine and the hard disk are shared the same data lines. 2 The data is too much. Please stop recording and backup. 3 The data exceeds the backup storage. 4 The backup equipment is not compatible. 5 The backup equipment is damaged. The keyboard can not control the DVR. Possible reasons are as followed: 1 The serial port of the DVR is not set correctly. 2 The address is not correct. 3 When multiple transformers are connected, the power supply is not large enough.
21、 The storage time is not enough. Possible reasons are as followed: 22、 1 Front camera quality is bad. The lens is too dirty. The camera is in backlighting installation. 2 The hard disk capability is not enough. 3 The hard disk is damaged. The downloading files can not play. Possible reasons are as followed: 1 There is no media player. 2 There is no DX8.1 software or higher edition. 3 There is no DivX503Bundle.exe file to play AVI video files. 4 The DivX503Bundle.
26、 The snapshot at alarm function was enable, why not catch picture Possible reasons are as followed: 1 HDD manage without partition for snapshot. 2 Partition for snapshot is 0 3 The snapshot function is not enable on record-> storage of related channel. 27、 The time shows on digital channel is not the same as local side: Enable the time synchronous function of digital channel.
Appendix 1.
Appendix 2.Mouse operation（optional） *Take right hand as an example The mouse in USB connection is supported.
Appendix 3.Hard disk capability calculation Make sure the hard disk installed to the DVR for the first time. Pay attention to the IDE hard disk lines connection. 1、 Hard disk capability There is no limit for recording machine. We recommend 120G~250G size to keep better stability.
