Installation guide

- 27 -
- Static IP: Select this option to assign the IP address for the camera
directly. You can use IP Finder to obtain the related setting values.
IP Enter the IP address of the camera. The
default setting is 192.168.0.40 for the
CNETCAM2 and 192.168.0.45 for the
C54NETCAM2.
Subnet Mask Enter the Subnet Mask of the camera. The
default setting is 255.255.255.0.
Default Gateway Enter the Default Gateway of the camera.
The default setting is 192.168.0.1.
Primary/
Secondary DNS
DNS (Domain Name System) translates
domain names into IP addresses. Enter the
Primary DNS and Secondary DNS that are
provided by ISP.
- PPPoE: Select this option when you use a direct connection via the ADSL
modem. You should have a PPPoE account from your Internet service
provider. Enter the User Name and Password. The camera will get an IP
address from the ISP as starting up.
Note: Once the camera get an IP address from the ISP as starting up, it
automatically sends a notification email to you. Therefore, when you
select PPPoE as your connecting type, you have to set up the email or
DDNS configuration in advance.
DDNS Setting
With the Dynamic DNS feature, you can assign a fixed host and domain
name to a dynamic Internet IP address. Select the Enable option to enable
this feature. Then, select the Provider from the pull-down list and enter the
required information in the Host Name, User Name, and Password boxes.
Please note that you have to sign up for DDNS service with the service
provider first.