Installation guide

- 50 -
- View mode buttons: Ultra View provides multiple view modes, including
1/4/9/16 windows and Full screen mode.
- SCAN: When you connect multiple cameras, click this button to display
the video views as the main window in turn.
- PREV: When you connect multiple cameras, click this button to switch the
video view to the previous camera.
- NEXT: When you connect multiple cameras, click this button to switch the
video view to the next camera.
Tip: To set the time interval of scanning, click SETTING > Other and then
adjust the time from 1 to 10 seconds in the Time interval of scan option.
 CAMERA Panel
- TRIGGER OUT: Click to turn on the trigger out connector of the camera.
This button is available only when the connected camera supports the
trigger out connector, which is used to control the external device
connected to the camera, such as a light.
- SNAPSHOT: Click to capture a still image using the selected camera and
save the file in the computer.
- RECORD: Click to start recording a video clip using the selected camera.
Click again to stop recording and save the file in the computer.
- TALK: Click to speak out through the camera. This button is available only
when the connected camera supports 2-way audio function.
- LISTEN: Click to receive the on-site sound and voice from the camera.
This button is available only when the connected camera supports audio
function.