Installation guide

- 57 -
To record video
Ultra View provides three methods to record video clips: one is to click the
RECORD/ALL RECORD button to record manually; the second is to record by
motion detection; the third is to set the recording schedule in Setting >
Recording Configuration > Schedule Recording Configuration.
 Manually recording
Click RECORD/ALL RECORD and it starts recording. Click the button again
to stop.
 Trigger recording by motion detection
When the motion detection function of the selected camera is enabled,
you can configure the camera to start recording triggered by the motion
detected. Click SETTING > Motion Configuration, and then select the
Recording option to enable the selected camera to record by motion
detection.