User manual

CIPCAMPTIWL User Manual
11
4.2 Port forwarding
If visit IP Camera from WAN, you must do port forwarding on the router. Take Netgear
router for example.
Figure 10
Operation Steps:
1) After login the interface of the router，choose “Port Forwarding”
2) Choose “Add custom Service”
3) Input IP camera port
4) Input IP camera IP address，click “Apply”。（ the http port and ip address should be
the same as figure 4 which set by you own)
Note: Different router has different settings for port-forwarding; please kindly
follow your router guide to do the port-forwarding.
After the port-forwarding is done, you could view the IP Camera from WAN now.
4.3 DDNS
You could also use the manufacturer DDNS to view the device as long as your
port-forwarding succeeds.
4.3.1 Free DDNS Portal
The Wireless Pan & Tilt Camera has free DDNS service. User can find it in network
menu, like figure 11.