User manual

CIPCAMPTIWL User Manual
14
with the equipment, if not, we would suggest you to disable this function and do the
port-forwarding manually.
5.1.5 DDNS Setting
Please refer to the content in 4.3.
5.1.6 MSN Setting
Figure 17
User needs to apply for a MSN account for this device first, for example:
[e-mail]. Please put this MSN account and its password as above Figure 17.
Then put your MSN account, for example: [e-mail], into the ‘MSN Friends
List. Then on your [e-mail] MSN list, you can see [e-mail] is
online. You just send “url?” to [e-mail] and you will get the WAN ip address of
this IP Camera. But please make sure [e-mail] and [e-mail]
should be MSN friends before you do the settings.
5.2 Alarm Settings
5.2.1 Alarm Setting
1） Alarm Detect
User can enable motion detection. If there is any motion, it will detect the motion and
trigger the alarm. In motion detect sensibility, the higher the figure, the more sensitive.
As showed in Figure 18, if any external alarm detector is connected, user will be able to
tick “Alarm Input Armed”. If the external alarm detector is an always on switch alarm,
please choose “open”. If the external alarm detector is always off switch alarm, please
choose “close”.