User manual

ENGLISH

6. Connecting your Media Giant

This chapter will explain how you can connect the Media Giant to your TV, home cinema system, network,

etc.

Connecting the antenna cable(s)

Note:

The digital tuner of the unit supports signal pass-through, to redirect the DVB-T signal from the

digital tuner input to the digital tuner output.

• Disconnect the main antenna cable from your TV or digital set-top box, and connect it to the digital

tuner input [10] of the unit.

• Connect the supplied antenna cable to the digital tuner output [9] of the unit and to the tuner input of

your TV or digital set-top box.

Connecting the Video Cable(s)

You can connect the unit in 5 different ways to your TV:

- HDMI

- Composite

- SCART (by using the Composite cable & Scart Adapter)

- S-Video *

- Component *

* When using S-Video or Component, only the video signal is send to your TV.

For the audio signal, use the Audio RCA Jacks on the Composite cable (Red, White), or the digital

audio output (optical or coaxial) of the media giant.

HDMI:

• Connect the HDMI cable to the HDMI output [15] of the unit.

• Connect the other end of the HDMI cable to a free HDMI input on your TV.

Composite:

• Connect the Composite cable (Yellow, Red, and White) to the corresponding AV OUT jacks [11, 19] on

the unit.

• Connect the other side of the Composite cable (Yellow, Red, and White) to your TV.

15 21 22

14 20

10 11