ENGLISH
31
Remote Control Explanation
The remote control is used to control the unit. On the inside cover of this manual you will
find a picture of the remote control. The numbers of the buttons correspond with the table
below, to explain each function of the remote control.
Nr Button Description
1. POWER ( ) Turn the unit on or to standby mode
2. REPEAT Change the Playback Repeat Mode
(Repeat One, Repeat Directory, Off)
3. OUTPUT Change the Output signal (Composite, Component, S-Video)
4. COPY Display the Copy Menu
5. CLEAR Clear the input / Delete the selection
6. AUDIO Change the DVD Audio track *
7. TITLE Return to the DVD Title screen *
8. RETURN Return to the previous screen / channel
9.
, , , Navigation Keys: Navigate through the Menu’s
10. MENU Display the Main Menu
11. PLAY / PAUSE Start Playback / Pause Playback / Pause Recording /
Initiate Timeshift
12. VOLUME + / - Increase or Decrease the Volume
13. PREVIOUS (
) Previous File / Track / Chapter / Picture
14. REWIND (
) Rewind Playback
15. 0 – 9 Menu Navigation / Direct channel entry
16. +10 + 10 Channels
17. 100 + 100 Channels
18. FAST FORWARD (
) Fast Forward Playback
19. NEXT (
) Next File / Track / Chapter / Picture
20. CHANNEL + / - Channel Up / Down
21. STOP (
) Stop Playback / Stop Recording / Disable Timeshift
22. RECORD Start Recording / Increase Record Time (+30 Minutes)
23. TIMER Enter the Record Scheduler
24. ENTER Confirm selection
25. QUALITY Set the record quality
26. SUBTITLE Change the DVD Subtitle *
27. ANGLE Change the DVD Playback angle *
28. STORAGE Change the Active Storage Device (HDD, USB, Card)
29. EDIT File Edit Menu
30. MODE Switch between Tuner, AV & Playback
31. DISPLAY Display Channel information / File information
32. MUTE Mute the sound
* The options marked with a * are intended for DVD Playback functionality. This feature is
not available yet.
The DVD Playback functionality will be available in the future with a firmware upgrade.
Check www.conceptronic.net
for new firmware releases.