Operation Manual

ENGLISH
12
To assign a function to the button of the remote control, click on the button of the onscreen
remote control. The button will blink yellow.
In the section “
Corresponding Hotkey and OSD Description
”
(11)
, you can enter the hotkey
and the description for the hotkey. This description will be shown on your screen if “
Enable
OSD” (3) is activated in the main program.
To remove a programmed hotkey, click on the button of the onscreen remote control, and press
“
Clear
”
(12)
.
To save the programmed hotkeys, press “
Save
”
(13)
. To cancel the made changed, press
“
Cancel
”
(14)
.
You can copy an existing application with the button “
Save As
”
(8)
. Enter a name for the
application and press “
OK
”.
All settings and hotkeys from the copied application are saved at the new application.
To delete an added application, press the button “Delete
” (9). At the upcoming dialog box,
select “
OK
”:
10
11
12
14 13