User's Manual

6.4.4. Network
Click the Network item in the left column to setup the LAN configuration of your
camera.
- IP Address Mode:
This field provides your with three options to select the IP
Address Mode:
- Fixed IP
You can select this option and enter the IP address
directly. The default settings are:
IP Address – 192.168.0.20
Subnet Mask – 255.255.255.0
Default Gateway – 0.0.0.0
- Dynamic Address (DHCP)
If your network uses the DHCP server, select this
option. According to this setting, the camera will be
assigned an IP address from the DHCP server
automatically. Every time when the camera starts
up, please make sure that the DHCP server is set to
assign a static IP address to your camera.
- PPPoE
If your application requires a direct connection from
an ADSL modem through the camera’s RJ-45 LAN
port, click this option and enter the User ID and
Password into the respective boxes. (You should
have an ISP PPPoE account.) The camera will get
an IP address from the ISP as starting up.
- DNS IP Address:
DNS (Domain Name System) server is an Internet service
that translates domain names into IP addresses. Enter at
least one DNS IP Address in this field.
- Dynamic DNS:
The Dynamic DNS service allows you to alias a dynamic IP
address to a static hostname in any of the domains, allowing
your computer to be more easily accessed from various
locations on the Internet.