Operation Manual

ENGLISH – DVB-T Plus Software Installation (Windows 2000 only)

4. DVB-T Plus Software Installation (Windows 2000 only!)

1. Click on “Start”, “Run” and execute the command the following command:

“E:\Software\Win2k\setup.exe” (Where E:\ is your CD-ROM drive).

2. The Setup Wizard will appear. Press “Next” to continue.

3. Select the Installation Folder and select “Next” to continue.

4. Select the StartMenu Folder and select “Next” to continue.

5. After the installation is complete, select “Finish” to close the installation

program.

For the First Time Usage Configuration of DVB-T Plus, proceed to chapter 4.1.

Note: The CTVDIGU2 CD-ROM contains 2 software packages. The

PowerCinema application in the Autorun Menu can only be used

with Windows XP.

To install the DVB-T Plus application for Windows 2000, follow the

steps below.

Note: Make sure you have a recent version of DirectX installed on your

computer. If you don’t have a recent version, use the option

“Install DirectX” on the CD-ROM to install DirectX.