User manual

10
4. If all the computers are communicated within the “same section of network”, the software
will detect all the PC which is installed the WinPower and show them in the left window of
WinPower as above photo.
Notes: “Same section of network” means the three front numbers of its IP address is
the same just like 192.168.1.XXX.
5. If the IP address is out of the same section of the Agent, you have to key-in the IP manually
for doing the remote monitor/control via “Monitor”->”Monitor Remote Device”
6. There are two major parts of the sheet of “Shutdown Parameter” in the WinPower as below.