User manual

Appendix B---Winpower Event Table
Serial
Number
Event Description
Type of
Message
Remarks
1
UPS Battery Low
Serious
Can be set as no shutdown system
through “Shutdown parameter”
2
UPS Battery Time
Exhaust
Serious
Can set battery backup time through
“Shutdown parameter”
3
UPS Fail
Serious
4
UPS Output Overload
Serious
Output load is more than 110%
6
Communication Lost
Warning
The connection of communication
cable is not good, or communication
port fault.
7
AC Fail
Warning
8
On Bypass
Warning
UPS will be switched to bypass mode
for the reason of overload, hardware
fault and so on. Online UPS is also in
bypass mode when it is off, at this
time UPS has no protection function.
9
Bypass without output
10
Self-test Fail
Warning
11
Phase sequence incorrect
in Bypass
Warning
Three-phase UPS support
12
Battery switch not
engaged
Warning
Three-phase UPS support
13
Load unbalance
Warning
Three-phase UPS support
14
Load too high
Warning
15
Internal warning
Warning
Three-phase UPS support
16
Maintain cover is open
Warning
17
AC Restore
Information
.
18
Communication Create
Information
.
19
Agent Start
Information
.
20
Agent Stop
Information
.
21
System be shutdown
Information
.
22
System be Shut down by
Other Agent
Information
Set the Agent need to be in response
to through “Shutdown parameter”.
23
Special date Close UPS
Information
.
24
Weekly Close UPS
Information
.
25
Self-test Start
Information
Self-test begins immediately.
26
Self-test cancel
Information
.
27
Self-test End
Information
.