Datasheet

Specification sheet
Conceptronic SnapPort network card for notebooks
CSP100TCL
Connect a notebook to a 10/100Mbps network
This PC Card automatically recognizes the speed of the network and can
switch back to 10 Mbps when used for a 10 Base-T network. The SP100TCL is
suitable for all notebooks that support 32 bits card bus. The PC-Card only uses
3,3 V in comparison to a regular PC Card which uses 5 V.
Specifications
General specifications:
•
Type II PCMCIA PC-Card (32 bit)
•
Compliant with IEEE 802.3 & IEEE
802.3U standard.
•
10Base-T/100Base-TX LAN auto
select.
•
LED indicators: 10/100/ACT
•
Built in 32 kB high speed
• SRAM for data buffering
•
Low power consumption (3,3V)
•
Supports wake up on LAN
•
NE-2000 compatible.
•
"Full Duplex" support.
• Drivers:
- Novell Netware
- Netware Lite
- Microsoft LAN manager
- Microsoft Windows for
Workgroups, Windows
95/98/ME/2000/XP, Linux and
Windows NT 4.0
•
NetBIOS
•
Banyan Vines 5.5
• Lantastic
•
IBM OS/2 Warp 3.0
•
Packet driver application
Included accessories:
•
Multi language manual
Minimum system requirements:
•
Celeron/Pentium II 300Mhz
Available PC-Card slot type II or
III
Warranty:
5 year