STORAGE CABINET MODEL To ensure that you have a speedy and pleasant time assembling your unit PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE BEGINNING ASSEMBLY. If you need assistance, DO NOT CALL THE STORE, call us. Our Customer Service Group is here to help you. CALL MONDAY-FRIDAY, BETWEEN 8:00AM TO 3:00PM PACIFIC TIME. Please be sure to follow the construction order in the Assembly Manual and complete each step before you proceed to the next step. Call: USA Ply craft Industries Inc. 2100 E. Onslaught Ave.
PARTS FINISHED THIS SIDE a) Top (1 pe.) b) Bottom (1 pc.) ¢) Fixed Shelf {1 pc.) d) Adjustable Shelves (3 pea) @) Top Apron and Mid Apron {2 cps) §) Bottom Apron (1 pc.) i) Doors o) Left Side h) Right Side i) Back Panel (4 pe) {1 pc.) {1 pc.) {1 pc.) HARDWARE {pun = I} Wood Dowel 1 (24 pea) @ m) Cam lock (18 cps) ma 18 n) Metal Fastener (18 cps) i.
Step 3 Insert 8-Wood Dowels (1) into Top (a). See diagram above. Insert 4-Metal Fasteners (n) into! Top.See Diagram above. ! Important Be sure all wood dowels and metal fasteners are located in the opposite holes BEFORE insert the cam locks. Step 4 DO NOT OVER TIGHTEN | TOP Insert 4-Cam Locks (m) into the large prevailed holes, point the arrow on the Cam in the direction of the side edge. Push the Cam info the hole.
Step 5 Step 6 Insert 3-Cam Locks (m) into the large prevailed holes, point the arrow on the Cam in the direction of the side edge. Push the Cam into the hole. Then use a screwdriver, to turn each Cam approximately 1/2 turn in the direction of the arrow (clock-wise) fo lock it in place. {Applies only on Bottom apron (unfinished back Mid apron (e) and Top Apron(e). See Diagram above. (m) Insert 7-Cam Locks {m) into the large prevailed holes, point the arrow on the Cam in the direction of the side edge.
Attach Top (a) to the previous sub assembly as shown. Use the interior packaging foam to lift the Cabinet to install the Top. Important Be sure all wood dowels and metal fasteners are located in the opposite holes BEFORE insert the cam locks. IMPORTANT: Back Panel must be completely aligned with TOP and side edges as well, to ensure a square cabinet . foam to lift the Cabinet NOTE: DO NOT LIFT OR TILT ON SIDE OR EDGES, DO NOT LIFT UP THE STORAGE CABINET UNTIL BACK PANEL IS INSTALLED, Page 6 .
Step 9 1) ci Step 10 Insert 2 Screws 8 X 5/8" (t) in each Hinge (s) as shown. See Diagram above. Attach each door with 4-Screws 8 X 5/8" (t) use per-drilled holes for guide as shown. See diagram Above.
Insert 12-Shelves Support {0} into Side holes in the position you decided then place the Adjustable Shelves (d). See Diagram above. SUPPORT BY ROTATING 180° rrr NJ NOTE: For safety, it is recommended to place items on the Storage Cabinet starting with the bottom shelf first working your way up the Cabinet, shelf by shelf to top shelf. As an added safety feature, we recommend to affix the Storage Cabinet to the wall.
Step 12 SECURED TO JS, WITH SCREW (2) ENN > N=" SECURED TO TOP OF BOOKCASE WITH SCREW (5) \ N Young children may be injured by tipping furniture. The use of a tipping restraint is highly recommended. This hardware, when properly installed, could provide protection against the unexpected tipping of furniture due to improper 7] Z 7 use. ” a WARNING: This product is only a deterrent. It is not LS substitute for proper adult supervision. Installation Instructions: 1.
Step 13 Insert 1 Screws 8-32 each Door to install Wood Handle as shown. See Diagram above. There are three adjustments that can be made on a European/cup cabinet door hinge. The two adjustments are: vertical, in-and-out and horizontal. Vertical hinge adjustment via slots in the mounting plate Why adjust a door up or down? To line up a row of doors. ra of Page 10 Horizontal 4.