Instructions / Assembly

ManualsBrandsConcepts In Wood ManualsHome Decor24 Slot Literature Organizer in Cherry

ASSEMBLY MANUAL

Literature Organizer

Model # LO 24 PC

CAUTION

MUST HAVE 2 PEOPLE

TO ASSEMBLE. DO NOT

LIFT OR TILT ON SIDE

OR EDGES AFTER

ASSEMBLY.

TOOLS REQ. * Screwdriver

* Rubber Mallet

* A Friend

IMPORTANT

DEAR CUSTOMER,

To ensure that you have a speedy and pleasant time assembling your unit

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE BEGINNING ASSEMBLY.

If you need assistance, DO NOT CALL THE STORE, call us. Our Customer Service Group is

here to help you. CALL MONDAY-FRIDAY, BETWEEN 8:00 AM TO 3:00 PM PACIFIC TIME.

Please be sure to follow the construction order in the Assembly Manual and complete each

step before you proceed to the next step.

Call: USA

Plycraft Industries Inc.

2100 E. Slauson Ave.

Huntington Park, CA 90255

Email: plycraft@ix.netcom.com

Toll Free Telephone: 1-800-765-9035 Telephone: 1-323-587-8101 Fax: 1-323-587-8220

Summary of content (4 pages)

PAGE 1
ASSEMBLY MANUAL Literature Organizer Model # LO 24 PC CAUTION MUST HAVE 2 PEOPLE TO ASSEMBLE. DO NOT LIFT OR TILT ON SIDE OR EDGES AFTER ASSEMBLY. TOOLS REQ. * Screwdriver * Rubber Mallet * A Friend IMPORTANT DEAR CUSTOMER, To ensure that you have a speedy and pleasant time assembling your unit PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE BEGINNING ASSEMBLY. If you need assistance, DO NOT CALL THE STORE, call us. Our Customer Service Group is here to help you.
PAGE 2
List of Parts (Quantity per Model) Wood Parts: Number 1. 2. 3. 4. 5. 6. 7. Description Right Side Bottom Top Left Side Vertical Partition Horizontal Partition Back Panel Qty. 1 1 1 1 2 7 1 HARDWARE PACK Description Fastener Pins Picture (not drawn to scale) 8 Cams 8 Screws for Back Panel 10 Label Holder Channels 7 Labels 24 Step 1. Dear Customer, please READ INSTRUCTION STEPS carefully before beginning. Assemble in general area you want your new Literature Organizer to be placed. Step 2.
PAGE 3
Step 11. Dear Customer with your friend carefully rotate the unit onto its face. Step 12. From the back of the unit slide 7 HORIZONTAL PARTITIONS into grooves of RIGHT SIDE #1 and LEFT SIDE #4. See Figure 3. Step 13. SLIDE 2 VERTICAL PARTITIONS into groove lines of TOP #3 and BOTTOM #2 . See Figure 4.
PAGE 4
Step 14. Place BACK PANEL # 7 on the back of the unit with finished side towards the inside of the unit. Install BACK PANEL # 7 with screws provided in hardware pack. See Figure 5. Step 15. IMPORTANT: BACK PANEL # 7 must be completely aligned with RIGHT SIDE # 1, LEFT SIDE # 4, BOTTOM # 2 and TOP # 3 as well as to ensure a square Literature Organizer. If necessary slightly move any of the four corners to the left or right to line up with the BACK PANEL # 7. See Figure 5. Step 16.